The Home Speaker System

I have two old floor speakers (from around 1980) the tweeter and mid range speakers work fine but both woofers are blown. could I replace the the woofers in the speakers with car sub-woofers?

Can I Replace Woofers In A Floor Speaker System?

How To Install A Powered Subwoofer

There is set of people called the car enthusiasts. These people have a peculiar aim of creating a sound system that could deliver very high and powerful sound. One such sound system can also show good depth in music. There are two ranges of sounds. One is the high range sound and the other is the low range sound. The high range sounds can be handled at speakers in the rear end, dash and door panels of the vehicle. But the lower tones and the bass effects are generally handled by the sub woofer which has got no other substitute. But how to install a sub woofer in a factory stereo?

Generally it is a minute job for audio professionals to perform this task of installation. But even an individual can learn how to install a sub woofer in a factory stereo. There are few tools required for accomplishment of this task. The usage of such tools will reduce the man power required and makes it easy to complete the task. It may include trim panel removals, Philips head screw driver, speaker wires.

The first step is the disconnection of grounding cable and the battery of the vehicle. The grounding cable is connected to the vehicle’s frame through the lead that is negative. With the help of a Philips screw driver the clamps of the cables are all loosened and kept separate from the negative lead.

Then the amplifier position is located after which the manual is gone through for any kind of procedure to be followed. The woofer can be placed either in the cargo area at the rear back or the car’s trunk in the case of models like hatch backs or SUV. The speakers are then connected to the output corresponding to each input.

The speaker wires are then routed to the location where the sub woofer is present. The amplifiers may be either close by the sub woofer or even far from them. In such cases the wires are routed to the sub woofers through the carpet layer under the floor of the vehicle. Hiding of the wiring is very essential to give your car a highly professional look.

The trim panels at the opening of the door are all pried from the floor free by using a trim panel removal tool. The carpet is then lifted up and the wiring is laid beneath it. Then using the hands the trim panels are replaced.

The positive wires are then connected to the positive terminal and in the same way the negative terminals connected with the negative wires. That is in general corresponding connections between sub woofer input and the speaker wires are made. At last a re connection is established between the vehicle battery’s negative lead post and the grounding cable. Then the cable clamps are fixed in its position and re installed using a Philips screw driver.

Knowing how to install a sub woofer in a factory stereo is of great importance in maintaining a car.

About the Author

Find the best Auto parts at bargain prices and much more information on Car Audio for the right car stereo. powernetshop.at have the best product evaluation on the internet.

"I can replace woofers mass of a loudspeaker system?

I have two old floor speakers (about 1980) and mid speakers wide tweeter working properly, but the two woofers are blown. could replace the speakers with woofer car sub-woofers?

No, you can not replace the bass in the speaker system with subwoofer car. They are rated 4 ohms and home audio AR 8 ohms. car speakers audio room designed for very low (short throw) and audio at home to the great hall (long range). You will not hear the same sound after have replaced the speaker. Home audio speakers has many improvements in the 80s, it is allot of speakers on the market today. Consider replacing your old for a new president. Stay with name brands like JBL, Infinity, Polk Audio, Definitive Technology, Paradigm, and Boston, to name few. Go online for Home Theater magazine and read the comments of stakeholders. I hope this help you.

Can I Replace Woofers In A Floor Speaker System?

How To Install A Powered Subwoofer

There is set of people called the car enthusiasts. These people have a peculiar aim of creating a sound system that could deliver very high and powerful sound. One such sound system can also show good depth in music. There are two ranges of sounds. One is the high range sound and the other is the low range sound. The high range sounds can be handled at speakers in the rear end, dash and door panels of the vehicle. But the lower tones and the bass effects are generally handled by the sub woofer which has got no other substitute. But how to install a sub woofer in a factory stereo?

Generally it is a minute job for audio professionals to perform this task of installation. But even an individual can learn how to install a sub woofer in a factory stereo. There are few tools required for accomplishment of this task. The usage of such tools will reduce the man power required and makes it easy to complete the task. It may include trim panel removals, Philips head screw driver, speaker wires.

The first step is the disconnection of grounding cable and the battery of the vehicle. The grounding cable is connected to the vehicle’s frame through the lead that is negative. With the help of a Philips screw driver the clamps of the cables are all loosened and kept separate from the negative lead.

Then the amplifier position is located after which the manual is gone through for any kind of procedure to be followed. The woofer can be placed either in the cargo area at the rear back or the car’s trunk in the case of models like hatch backs or SUV. The speakers are then connected to the output corresponding to each input.

The speaker wires are then routed to the location where the sub woofer is present. The amplifiers may be either close by the sub woofer or even far from them. In such cases the wires are routed to the sub woofers through the carpet layer under the floor of the vehicle. Hiding of the wiring is very essential to give your car a highly professional look.

The trim panels at the opening of the door are all pried from the floor free by using a trim panel removal tool. The carpet is then lifted up and the wiring is laid beneath it. Then using the hands the trim panels are replaced.

The positive wires are then connected to the positive terminal and in the same way the negative terminals connected with the negative wires. That is in general corresponding connections between sub woofer input and the speaker wires are made. At last a re connection is established between the vehicle battery’s negative lead post and the grounding cable. Then the cable clamps are fixed in its position and re installed using a Philips screw driver.

Knowing how to install a sub woofer in a factory stereo is of great importance in maintaining a car.

About the Author

Find the best Auto parts at bargain prices and much more information on Car Audio for the right car stereo. powernetshop.at have the best product evaluation on the internet.

"I can replace woofers mass of a loudspeaker system?

I have two old floor speakers (about 1980) and mid speakers wide tweeter working properly, but the two woofers are blown. could replace the speakers with woofer car sub-woofers?

No, you can not replace the bass in the speaker system with subwoofer car. They are rated 4 ohms and home audio AR 8 ohms. car speakers audio room designed for very low (short throw) and audio at home to the great hall (long range). You will not hear the same sound after have replaced the speaker. Home audio speakers has many improvements in the 80s, it is allot of speakers on the market today. Consider replacing your old for a new president. Stay with name brands like JBL, Infinity, Polk Audio, Definitive Technology, Paradigm, and Boston, to name few. Go online for Home Theater magazine and read the comments of stakeholders. I hope this help you.

Can I Replace Woofers In A Floor Speaker System?

How To Install A Powered Subwoofer

There is set of people called the car enthusiasts. These people have a peculiar aim of creating a sound system that could deliver very high and powerful sound. One such sound system can also show good depth in music. There are two ranges of sounds. One is the high range sound and the other is the low range sound. The high range sounds can be handled at speakers in the rear end, dash and door panels of the vehicle. But the lower tones and the bass effects are generally handled by the sub woofer which has got no other substitute. But how to install a sub woofer in a factory stereo?

Generally it is a minute job for audio professionals to perform this task of installation. But even an individual can learn how to install a sub woofer in a factory stereo. There are few tools required for accomplishment of this task. The usage of such tools will reduce the man power required and makes it easy to complete the task. It may include trim panel removals, Philips head screw driver, speaker wires.

The first step is the disconnection of grounding cable and the battery of the vehicle. The grounding cable is connected to the vehicle’s frame through the lead that is negative. With the help of a Philips screw driver the clamps of the cables are all loosened and kept separate from the negative lead.

Then the amplifier position is located after which the manual is gone through for any kind of procedure to be followed. The woofer can be placed either in the cargo area at the rear back or the car’s trunk in the case of models like hatch backs or SUV. The speakers are then connected to the output corresponding to each input.

The speaker wires are then routed to the location where the sub woofer is present. The amplifiers may be either close by the sub woofer or even far from them. In such cases the wires are routed to the sub woofers through the carpet layer under the floor of the vehicle. Hiding of the wiring is very essential to give your car a highly professional look.

The trim panels at the opening of the door are all pried from the floor free by using a trim panel removal tool. The carpet is then lifted up and the wiring is laid beneath it. Then using the hands the trim panels are replaced.

The positive wires are then connected to the positive terminal and in the same way the negative terminals connected with the negative wires. That is in general corresponding connections between sub woofer input and the speaker wires are made. At last a re connection is established between the vehicle battery’s negative lead post and the grounding cable. Then the cable clamps are fixed in its position and re installed using a Philips screw driver.

Knowing how to install a sub woofer in a factory stereo is of great importance in maintaining a car.

About the Author

Find the best Auto parts at bargain prices and much more information on Car Audio for the right car stereo. powernetshop.at have the best product evaluation on the internet.

"I can replace woofers mass of a loudspeaker system?

I have two old floor speakers (about 1980) and mid speakers wide tweeter working properly, but the two woofers are blown. could replace the speakers with woofer car sub-woofers?

No, you can not replace the bass in the speaker system with subwoofer car. They are rated 4 ohms and home audio AR 8 ohms. car speakers audio room designed for very low (short throw) and audio at home to the great hall (long range). You will not hear the same sound after have replaced the speaker. Home audio speakers has many improvements in the 80s, it is allot of speakers on the market today. Consider replacing your old for a new president. Stay with name brands like JBL, Infinity, Polk Audio, Definitive Technology, Paradigm, and Boston, to name few. Go online for Home Theater magazine and read the comments of stakeholders. I hope this help you.

What Size Speakers Does My 96 Mitsubishi Eclipse Spyder Gs Use?